产品详情
Sensyflow FMT200-ECO2 is a very compact and extremely dynamic mass flow meter for air. It offers a direct mass or standard volume flow measurement in pneumatic applications, e.g. in paint robot control. A multi-variable connection system makes the Sensyflow FMT200-ECO2 easy to install in many different tubes or pipes. Analog and digital output signals allow for flexible signal processing.
| 2 Specifications |
| Measuring principle Thermal: hot-film anemometer Input |
| Measured medium |
| Air |
| Measuring ranges1) |
| 0 (1) ... 100 kg / h or 0 (12) ... 1250 Nl / min2) |
| Output |
| Analog output signal |
| 0 ... 5 V |
| 0 ... 10 V |
| 0 / 4 ... 20 mA |
| Load |
| < 500 Ω |
| Error indication |
| < 3.5 mA or > 22 mA |
| Digital output |
| 24 V, 20 mA |
| Frequency output |
| variable 1 ... 2500 Hz |
| Counter pulse |
| Pulse evaluation and pulse duration configurable |
| Alarm values |
| Minimum and maximum, adjustable |
| Polarity adjustable |
| Characteristics |
| Measured error |
| < ± 3 % of measured value |
| Repeatability |
| < ± 0.5 % of measured value |
| Response time |
| T63 » 25 ms; T98 » 90 ms Influences Temperature effect |
| < 0.1 % / K of measured value |
| Pressure effect |
| ≤ 0.2 % / 100 kPa (/bar) of measured value |
| Pressure drop |
| < 10 kPa (100 mbar) at full scale and using the small flange adapter DN 25; decreasing quadratically for smaller flow rates. |
| Environmental conditions |
| Ambient temperature for flowmeter sensor |
| 0 ... 50 °C (-13 ... 122 °F) |
| Degree of protection |
| IP 65 |
| Storage temperature |
| -25 ... 85 °C (-13 ... 185 °F) |
| Measured medium conditions |
| Measured medium temperature |
| 0 ... 50 °C (32 ... 122 °F) |
| Measured medium pressure |
| Standard: 10 x 102 kPa (10 bar abs.) High pressure version: 16 x 102 kPa (16 bar abs.) |
| Construction |
| Weight |
| 0.51 kg (accessories see ordering information) |
| Material |
| Flowmeter sensor: aluminium, Hostadur, tinned Cu, glass Process connections: aluminium |
| Fittings: aluminium |
| Process connection |
| Small flange adapter ISO KF flange; Threads G 3/8“, G 3/4“, G 1/2“, G 1“; Legris tube adapter, Transair adapter |
| Electrical connection |
| Sub-D connector, serie 712, 8-pin, IP 65 |
| Power supply3) |
| Voltage |
| 24 V DC ± 10 % |
| Power consumption |
| < 15 W |
| Current consumption |
| Peak < 1 A; operation < 0.6 A |
| Slow-blow fuse of at least 2 A recommended |
| Communication interface |
| RS 232 |
| Approvals for explosion protection (zone 2 and zone 22) |
| Gas: ATEX II 3 G EEx n A II T4 X Dust: ATEX II 3 D T 135 °C IP 65 X |
| Accessories (optional) |
| - Inlet and outlet runs |
| - Pipe fittings |
| - Connection adapter |
| - Quick-clamping connectors |
| - Reducers |
| - Power supply unit |
| - Display unit |
| - Display and supply unit completely installed in an IP 65 housing |
| 1) Approximate values are given for applications with air under atmoshperic conditions. The values in brackets indicate the low limit of the measuring range for which the measured value accuracy indicated is specified. |
| 2) It is possible to specify any unit which you can transform into a mass or standard volume flow. (Can also be written as: l / min-qn). |
| 3) Power supply with safe electrical separation in accordance with EN 61010 and IEC 950, with max. output power of 150 W. |
摘要:SEASYSY-HG109湿度发生器采
[详细]
摘要:fjrigjwwe9r1dt_article:co
[详细]
摘要:温湿度探头HMP155
[详细]
摘要:fjrigjwwe9r1dt_article:co
[详细]
摘要:fjrigjwwe9r1dt_article:co
[详细]
棉柔巾 三相多功能电力仪表 冰水机 家用垃圾粉碎机 磁致伸缩液位仪 便携式齿轮齿距测量仪 化验员基本操作与实验技术 越联 YEJ-101 北京普特不锈钢耐震压力表 徕卡DM3000生物显微镜 精巧型一体化数显温度变送器 循环超声提取机 FRC高压测量仪 维库仪器仪表网 湿式球磨机 切割型湿法超细粉碎机 十万分之一天平 电子镇流器 电液伺服动静试验机 振动测试机 第三代金属管浮子流量计 钢筘超声波清洗机 高压开合式电流互感器 安徽省应急物资保障规划(2021-2025) ERO电动球阀 室外消防给水系统 热电偶校验装置 DDS-11A电导率仪 振动实验台 有功功率电能表 瓦斯继电器 直流系统接地故障测试仪 多用电表 台式多路信号发生校验仪 中频熔炼电炉 超声波污泥界面仪 立式离心机 压力式水位计 电动偏心旋转调节阀 长颈鹿多功能培养箱 CLW-DR-2 良田C605数码显微镜 手带 发酵制品安力建设实施方案 滨州阀门 PIT-X 可编程恒温恒湿试验机 programmable 视得乐
