供应WHEATLEY® Check Valves止回阀,WHEATLEY® Check Valves止回阀供货期-仪表网

产品详情

WHEATLEY® Check Valves止回阀
WHEATLEY® Check Valves止回阀由美盛科技中国有限公司供应
WHEATLEY® Check Valves止回阀自 1916 年以来是在流量控制行业的***。正文设计*大流量区压力损失减到*小和*大程度减少安装空间和时间

WHEATLEY® Check Valves止回阀
WHEATLEY® Check Valves止回阀由美盛科技中国有限公司供应
WHEATLEY® Check Valves止回阀自 1916 年以来是在流量控制行业的***。正文设计*大流量区压力损失减到*小和*大程度减少安装空间和时间

Valves - WHEATLEY Dual Plate Wafer Check Valve

设计特点
惠特利的车身设计提供了以下功能：
• 紧凑晶圆一体式的设计风格
• 中心职位支持没有外部的内部程序集
针脚或插头
• 由于惠特利，确保无渗漏到 atmoshere 的标准
它消除了通过孔和管道的设计插头在正文中
• *大流通面积减到*小的压力损失
• *大程度减少安装空间和时间

双板设计生产*大强度的*低开启和关闭时间

夹紧板提供额外的阀板的强度和允许密封件可以方便地更改
专门设计的平面、完整的联系密封件保持积极关闭在低工作压力。与大多数其他阀门，不同的是这些封印很容易被取代在字段中

扭转弹簧协助防止流逆转的阀板封闭。一致阀门的反应可确保针对砰和水击

重型耐腐蚀建设轴

轴支持作为停止以防止阀板的旅行。耐腐蚀与大轴轴承表面。轻松地可移动内部装配、维修或更改

Valves - TOM WHEATLEY Piston Check Valves

Standard Features
• Size range: 2 in. through 12 in.
• ANSI Classes:150 - 1500
• Full open / top mounted piston check valve
• Controlled clapper movement on full opening piston check valves
• Horizontal or Vertical service
• Metal-to-Metal seats
• Quick opening of piston
• RF or RTJ end connections

Optional Features
• Integral or removable seat
• Metal overlays

Body Construction
• Carbon Steel Body, Cover and Trim.

Valves - WHEATLEY Short Pattern Wafer Check Valve

Inexpensive Reduced Port Check Valves are used in applications where...
• Media is clean (abrasives are not present)
• Flow is steady and not pulsating
• Flow rates are low
• Pigs or spheres are not intended to run through the valve
• Velocity through the seat does not exceed:
Liquids 15 feet per second
Gases 100 feet per second

Valves - WHEATLEY Series 500 Fire Tested Carbon Steel Flanged End Check Valve

API 6D/Drilling production valve carbon steel flanged end check valves

When you need a check valve that has to work!

Features:
• 316 stainless steel trim is compatible with a broad range of
media and operating conditions
• Full-Open, through-conduit design for low pressure drop and
less turbulence.Valves easily pass pigs and spheres
• 90 Durometer, peroxide-cured seals are compatible with a
broad range of media and operating conditions. Seals provide
a bubble-tight shut-off every time
• Suitable for vertical flow up or horizontal installation.
Eliminates installation guesswork
• All materials conform to NACE MR0175 / ISO 15156
• Cast on flanges provide greater valve body integrity and
fewer leak points
• API 6D Monogram (510 / 511 Only)

API 6D/Drilling production valve carbon steel flanged end check valves

When you need a check valve that has to work!

• Designed in accordance with ASME B16.34 (510 / 511 Only)
• Valve is fire tested to API 6FD requirements (except for 1 in. (25 mm) valve)
• CANADIAN REGISTRATION NUMBER (CRN) available upon request
• Flanges are back-faced - an extra manufacturing step which provides smoother bolting surfaces and
even bolt loading
• Bolted top entry complete with 1/2 in. NPT cover tap for gauges and accessories (except 1 in. (25 mm) size)
• In-line repairable
• Thru-pin clapper shaft makes clapper removal easier and extends valve life by transferring wear and tear to
an inexpensive replaceable part.

Valves - WHEATLEY Series 822 Check Valve

WHEATLEY^® Series 822 Check Valves

When you need a check valve that has to work!

Features:
• Designed in Accordance with ASME B16.34 (WCC, LCC and
CF8M only)
• Material of construction conform to NACE MR0175 / ISO 15156
• Solid 316 stainless steel clapper and hanger which eliminates the
need for seperate pins, bushings and rollers
• Compact valve geometry minimizes weight and space
• Bevelled, self-aligning clapper and seat design incorporates
a molded seal in the clapper for a bubble-tight primary and
metal-to-metal secondary seal
• Peroxide-cured Buna-N (FKM & HNBR optional) Seals
• Generous wrench area on body and hex-head threaded cover for
easier installation and maintenance
• Full opening
• Suitable for horizontal or vertical flow up
• Below-the-threads cover seal isolates the cover threads from
line media
• Metal Nameplate