U4324A探头

主要特性与技术指标

每个探头包括 4 个通道

每个通道均可定制映射（方向和通道数）

焊入式可更换 ZIF 探针

可选外部参考时钟信号源电缆

低电容性负载

支持 PCIe 2.5 Gb/s、 5.0 Gb/s 和 8.0 Gb/s

一（1）个探头支持 x1 和 x2 通道宽度（单向和双向）或 x4 通道宽度（单向）

工作温度为 0 °C 至 +55 °C

描述

U4324A 飞线探头是一款适用于 U4301A PCIe Gen3 协议分析仪模块的是德探测解决方案。每个飞线探头一端包括 5 条电缆，另一端具有一个适配夹，5 条电缆中有 4 条用于捕获 PCI Express 差分信号，剩下 1 条用于将探头连接到被测件上的可选外部参考时钟。适配夹可插入到 U4301A PCIe3 协议分析仪的端口中。4 条信号电缆都能够插入到可更换的 N5426A ZIF（零插入力）探针中，探针将焊入被测件通道上。参考时钟电缆要求将 3 排针固定到被测件参考时钟输出源。该 3 排针与用于连接 U4322A 中心总线 3.0 探头上的可选外部参考时钟相同。

Main Characteristics and Technical Indicators

Each probe consists of four channels

Each channel can fully customize the mapping (direction and number of channels)

Welded-in Replaceable ZIF Probe

Optional external reference clock signal source cable

Low Capacitive Load

Support PCIe 2.5 Gb/s, 5.0 Gb/s and 8.0 Gb/s

One (1) probe supports x 1 and X2 channel widths (unidirectional and bidirectional) or X4 channel widths (unidirectional)

Working temperature is from 0 C to + 55 C

describe

U4324A flying wire probe is a German detection solution for U4301A PCIe Gen3 protocol analyzer module. Each fly-wire probe consists of five cables at one end and an adapter clamp at the other end. Four of the five cables are used to capture PCI Express differential signals, and the remaining one is used to connect the probe to an optional external reference clock on the tested piece. The adapter clip can be inserted into the port of U4301A PCIe3 protocol analyzer. All four signal cables can be inserted into the replaceable N5426A ZIF (zero insertion force) probe, which will be welded into the channel of the tested piece. The reference clock cable requires three rows of pins to be fixed to the reference clock output source of the measured piece. The three-row needle is the same as the optional external reference clock used to connect the probe of U4322A central bus 3.0.