产品详情
The Simtronics GD1 sets a new standard for toxic gas detection. Using a tuneable laser diode, the GD1 delivers enhanced coverage and fail safe detection. The performance improvement marks a genuine step change for safety systems and life cycle cost savings.
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants.At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no interference from other gases.
Unlike traditional methods for detecting H2S (MOS or EC cell) the GD1 needs no recalibration and can replace multiple standard detectors to cover the same risk. The complete optomechan ical design and construction is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.
Supplied with worldwide hazardous area approvals. Suitable for use in systems with SIL 2 requirement.
技术参数:GENERAL | |
Type | Gas detector |
Product | GD1 |
Product code | GD1-L0P-31KH-0XH-A0 |
Manufacturer | Simtronics |
GAS DETECTOR | |
Type | Laser Open Path Gas Detector |
Design principle | Near IR Laser Scanning |
IR Source | Tuneable laser diode, Laser Class 1, eye safe |
Calibrated gas | Hydrogen sulphide (H2S) |
Detected gases | Target gas only |
Calibrated range | 0 – 200 ppm.m 0 - 500 ppm.m 0 - 1000 ppm.m 0 - 2000 ppm.m 0 - 5000 ppm.m 0- 20000 ppm.m |
Path length | 5 – 50m; 5 - 75m (long range) |
PERFORMANCE | |
Zero point stability | ±2%, Relative to full scale deflection (FS) |
Span stability | ±3% FS |
Response time | 5 sec |
Tolerable Obscuration | ≤98% |
Calibration interval | Fixed factory calibrated. No field calibration required. |
ELECTRICAL | |
Power supply | 24V DC, (range 18 - 32V DC) |
Power consumption | 15W max (TX: 10W + Rx: 5W) |
Cable entry | M20 |
Heated Optics | Yes |
Junction box | Supplied with Exe junction box for Transmitter (Tx) and Receiver (Rx). |
Connection | 0.5 mm2 (20 AWG) - 2.5 mm2 (14 AWG), 3 wires |
Analogue output signal | 0-20mA, max. load impedance 500Ω. |
Fault signalling | Diagnosis signalling in the 0.4 - 3.0mA range |
Maintenance interface | HART v6.0 Universal Commands |
ENVIRONMENT | |
Storage | -40°C to +70°C (-40°F to 158°F) |
Operation | -40°C to +65°C (-4°F to 149°F) |
ATEX flameproof | -55°C to +75°C (-67°F to 167°F) |
Humidity | 99% RH (non-condensing) |
Ingress | IP66 / IP67 DIN 60529 |
RFI/EMI | Complies with EN 61000-6-2, EN 61000-6-4, EN 50270, EN 60945 |
HOUSING | |
Ex Classification | Tx/Rx: ATEX II 2 G EExd IIC T5 JB: ATEX II 2 G EEx e T6 |
Material | 316 L stainless steel |
Weight | Tx/Rx: 5.5 Kg (12 lbs), JB: 2.0 Kg (4.4 lbs) |
Dimensions | 205L x 115W x 248H (mm), 8.1 x 4.3 x 9.8 (inches) |
APPROVALS | |
ATEX | DNV 2008 ATEX 18877X |
IECEX | DNV 10.0002X |
Ingress | IP66/IP67 IEC 60529 |
SIL | Suitable for use in SIL2 systems |
ACCESSORIES | |
GD1-X00-TT01 | Alignment kit |
GD1-X00-TT05 | Test cell |
Product Sheet H2S398.36 KB
Product Sheet CO2596.80 KB
Operating Manual (English)2.13 MB
GD1 Drawing240.55 KB
DNV ATEX Certification239.80 KB
DNV IECEx Certification91.57 KB
CE Declaration189.91 KB
SIL 2 Declaration272.91 KB
应用:
上海精科YP3001N十分之一电子天平 二位阀 煤气压力计 温控调节阀 变频器专用电力电缆 机械密封结构图例及应用 洁盟视洁杯 便携式硬度计 RL-1Y预付费热量表 高温流量计 防爆行程开关 双向压蝶阀 赛邦家居店 智能网络秤 集成式机器视觉系统 无损检测员-磁粉检测 碳化氢 移动式光谱仪 全自动电机综合试验台 管道式加热器 色彩色差仪 ZCPY超高压电磁阀 电子目镜 金属扭转试验机 哑铃裁刀 浮球式液位开关 动态轮轴旋转弯曲疲劳试验台 块式制动器制动瓦块 温度传感器外壳 二氧化碳浓度检测仪 雾化试验机 WE-1000B液晶数显式试验机 建筑节能设备及系统 电子吊磅称 SF6气体综合测试仪 便携式气体检测报警仪 建筑设备安装技术与实例 机械秤 四合一气体检测仪 实验室高压均质机 微波萃取 六轴工业机器人 自来水表 TLHG-3302电能表现场校验仪 赛钛客专业液晶飞行仪表面板安装使用方法 上海越平FA1204C万分之一电子天平 航站楼离港系统 扫描探针显微镜 液压离合器 中阀控股集团