供应S-150-5-供应开关电源,开关电源-仪表网

产品详情

开关电源S-150系列

低价格、高可靠 Low price and high reliability

105℃输出电容器 105℃output capacitor

适用AC输入电源 AC input power suitable for the world

效率高、工作温度低 High efficiency and low operation temperature

软启动电流、有效降低AC输入冲击 Soft-start current can reduce the AC input impact efficiency

有短路保护、过载保护 With short-circuit and overload protection

体积小、重量轻 Compact size, light weight

100﹪满负荷烧机测试 100﹪full-load burn-in test

内装EMI滤波器、纹波极小 Installed with EMI filter, minimum wave

型号 Mode 性能 Performance	S-150-5	S-150-7.5	S-150-9	S-100-12	S-100-13.5	S-100-15	S-100-24	S-100-27	S-100-48
直流输出电压 DC output voltage	3V	5V	7.5V	12V	13.5V	15V	24V	27V	48V
输出电压公差 Output voltage tolerance	±2﹪	±2﹪	±1﹪	±1﹪	±1﹪	±1﹪	±1﹪	±1﹪	±1﹪
额定输出电流 Rated output current	30A	20A	16.7A	12.5A	11.5A	10A	6.5A	5.6A	3.2A
输出电流范围 Output current range	0～30A	0～20A	0～16.7A	0～12.5A	0～11.5A	0～10A	0～6.5A	0～5.6A	0～3.2A
纹波及噪音 Ripple and noise	150mVp-p	150mVp-p	120mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	75mVp-p
进线稳定度 Inlet stability	±0.5﹪	±0.5﹪	±0.3﹪	±0.3﹪	±0.3﹪	±0.3﹪	±0.2﹪	±0.2﹪	±0.2﹪
负载稳定度 Load stability	±0.5﹪	±1﹪	±0.5﹪	±0.3﹪	±0.3﹪	±0.3﹪	±0.2﹪	±0.2﹪	±0.2﹪
直流输出功率 DC output power	150W	150W	150W	150.3W	150W	150.2W	156W	151.2W	153.6W
效率 Efficiency	80﹪	80﹪	80﹪	82﹪	83﹪	84﹪	85﹪	86﹪	87﹪
直流电压可调范围 Adjustable range for DC voltage	4.5-5.5V	6-8.35V	8-10.45V	10.6-13.2V	12-15V	13.5-16.5V	21-28V	24-30V	43.-53V
输入电压范围 AC input voltage range	85～132VAC/170～264VAC由开关选择47～63Hz; 240～370VDC 85～132VAC/170～264VAC selected by switch 47～63Hz; 240～370VDC
输入电流 Input current	3.2A/115V 1.6A/230V
冲击电流 AC dash current	冷启动电流30A/115V 60A/230V Cold-start current 30A/115V60A/230V
漏电流 Leakage current	＜3.5mA/240VAC
过载保护 Overload protection	105﹪～150﹪类型：切断输出复位：自动恢复 105﹪～150﹪ Type: pulsing hiccup shutdown reset: auto recovery
过电压保护 Over-voltage protection	115%--135%
高温保护 High-temperature protection	………………….
温度系数 Temperature coefficient	±0.03﹪/℃(0～50℃)
启动、上升、保持时间 Startup .rise .retention time	100ms 50ms 20ms
抗震性 Vibration	10～500Hz,2G10min/1周期，时长60分钟，各轴 10～500Hz,2G10min/1 cycle , Period for 60 min , Each axes
耐压性 With standard voltage	输入输出间：1.5KvAC输入与外壳： 1.5KvAC输出外壳： 0.5KvAC Input and output internal ：1.5KvAC input and enclosure ： 1.5KvAC output and enclosure： 0.5KvAC
隔离电阻 Isolation resistance	输入输出间：输入与外壳，输出与外壳：500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ
工作温度、湿度 Working temperature and humidity	-10℃～+60℃(参考输出特性图)，20﹪～90﹪RH -10℃～+60℃(Refer to output diagram cech，20﹪～90﹪RH
存储温度、湿度 Store temperature and humidity	-20℃～+85℃, 10%～95%RH
外型尺寸 Overall dimension	199×98×38mm
重量 Weight	0.7kgs
安全标准 Safety standards	UL1012 TUV按6050（IEC,UL1950）认证 UL 1012 TUV EN6050(IEC,UL1950) Approved
EMC标准 EMC standards	CISPR22(按55022)，IEC801-2,3,4IEC555 -2认证 CISPR22(EN55022)，IEC801-2,3,4IEC555 -2 Verification
备注： 1.以上参数测试条件为：230VAC输入，额定负载,25℃70%Rh,温度。 2．容差：包括设定容差，线路稳定度，负载稳定度 3．纹波测试：20MHz用“A12”双绞线，中断用0.1uF&47uF电容器短路。 4．进线电压稳定度测试：满负载时进线Z低电压到Z高电压。 5．负载稳定度测试：负载从0%到 Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load,25℃70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. Wave test: adopt “A12”double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to