SiDE (动铁交流电流表)模拟面板表

SiDE (Moving IronAC Meter). The moving iron panel meters, DE 48/72/96/144 housed inmoulded polycarbonate cases are suitable for the measurement ofAC currents for frequency range of 15…400Hz and voltages inthe frequency range of 15…100Hz.

Moving iron metersindicate rms-values practically independent of waveform even of highharmonics. Error of indication may occur for extreme waveforms (e.g. phasegating controls) & for frequencies above 100KHz.

These meters offerseveral advantages in switchboards and Generating Set Panels. Number ofmeters can be mounted in a Panel cut out Mosaic mounting). For CT operatedammeters, dials can be fitted based on CT ratio. Glass and bezel can be easily replaced.

SiDE (动铁交流电流表)。动铁面板表,DE 48/72/96/144安置在模压聚碳酸酯情况下适合测量交流电流的频率范围15…400赫兹和电压15…100赫兹的频率范围。

动铁表表明，即使是高次谐波，rms值实际上是独立于波形的。波形(如相位控制控制)和频率超过100KHz的频率可能出现误差。

这些仪表在配电盘和发电机组上提供了一些优势。可以安装在一个面板上，切割马赛克安装。对于CT操作的电流表，可以根据CT比调整刻度。玻璃和边框很容易更换。

产品资料：

IP65_sifamtinsley_installation_instructions

Sigma Series Analog Meter_credentials

Sigma_Series_DE_Meter

Features

特性

• Scaleinterchangeability
• Near linear scale
• Glass filled polycarbonate housing. (UL 94 V-0)
• Knife edge pointer
• Easily replace able glass and bezel

•规模可交换性

•附近的线性范围

•玻璃填充聚碳酸酯外壳。(UL 94 V-0)

•刀口指针

•易更换的玻璃和边框。